0241FR
RapidTray Cavity Tray System
Class A - EN 13501-1
The next generation Cavity Tray System that delivers uncompromising performance and rapid installation. Read More
-
6 Months Exposure
-
Class A
-
EN 1928 - EN 14909
OBEX CORTEX 0241FR RapidTray Cavity Tray System - TDS
OBEX CORTEX 0241FR RapidTray Cavity Tray System - SDS
OBEX CORTEX 0241FR RapidTray Cavity Tray System - DoP
OBEX CORTEX 0241FR RapidTray Cavity Tray System - Install Guide
OBEX CORTEX 0241FR RapidTray Cavity Tray System - Kiwa Certificate
The OBEX 0241FR RapidTray system is a highly flexible and adaptable cavity tray system, achieving Class A2 fire classification. The membrane incorporates an integrated stainless steel fixing strip, with pre-drilled holes at 150mm centres for faster and easier installation.
RapidTray has been designed and tested in accordance with British Standards, with all overlap joints having a minimum of 100mm bond width adhered together with tapes rather than adhesives for a cleaner and more cost-effective solution.
Independently water-flow tested by the BBA and achieving Agrement certification by KIWA BDA, RapidTray sets a new benchmark as the leading flexible cavity tray system on the market. The system is complete with pre-formed components such as external and internal corners. Bespoke shapes and parts are available upon request.
This product complies with Approved Document B Vol 1 & 2, Regulation 7, Paragraph 2 – materials which become part of the external wall, or specified attachment, of a relevant building are of European Classification A2-s1,d0 or A1.
Key System Benefits
- DRASTICALLY REDUCED INSTALLATION TIME – Integrated pre-drilled, stainless steel fixing strip
- EASE OF INSTALLATION – highly flexible, with pre-formed corner pieces to suit 50mm – 1000mm cavity sizes
- FULL REGULATORY COMPLIANCE – A2-s1,d0 fire classification (EN 13501-1) | 3rd Party KIWA Certified: BAW-25-404-P-A-UK | Independently water flow tested by the BBA
- FULLY COMPATIBLE WITH ADHERING TAPES – Non-silicone surfaces for excellent tape-bond
- DRY, CLEAN SYSTEM – No paste/mastic required (except for sealing to any silicone-based surfaces)
Widths
50mm - 1500mm
Length
20m
Thickness
0.4mm
Colour
Black / White (installed black side up/ facing the direction of water penetration)
Packaging
Individual
Harmonised standard | EN 14909
Fire Classification | EN 13501-1
A2-s1,d0
Watertightness | EN 1928
Pass - 2kPa for 24 hours
Watertightness After Ageing | EN 1296 / EN 1928
Pass - 2kPa for 24 hours
Joint Strength | EN 12317-2
611 N / 50mm
Joint Strength After Ageing | EN 12317-2 / EN 1296
526 N / 50mm
Resistance To Impact | EN 12691
Pass - 1000mm
Resistance to Low Temperature | EN 495-5
-20°C - +20°C – Pass
Tear Resistance | EN 12310-1
156 N
Water Vapour Transmission | EN 1931
27009 μ
Sd value | EN 1931
10.8 m
Resistance To Static Loading | EN 14909 Annex B
Pass - 20kg
Durability Against Chemicals (Alkali) | EN 1847 / EN 1928
Pass – 2kPa for 24 hours
Characteristic Initial Shear Strength of Masonry Wall Incorporating RapidTray | EN 1052-4
0.11 N/mm²
Characteristic Flexural Strength of Masonry Wall Incorporating RapidTray | DD 86-1
0.02 N/mm²
Deformation Under Load | EN 14909
0mm
UV Exposure | ISO 4829-3 / EN 1928
6 Months